In stock
Only 5 left
SKU
KVR16S11S8/4

Kingston 4GB DDR3 1600MHz SODIMM Memory

Kingston 4GB, DDR3, 1600MHz (PC3-12800), CL11, SODIMM Memory - KVR16S11S8/4
£29.48 £24.57

4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 204-Pin SODIMM

 
ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold
contact fingers. 
 
 
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component
More Information
Manufacturer
Kingston
Model
ValueRAM
Memory size
4 GB
Memory Speed
1600MHz
Device Type
DDR3
Form Factor
SODIMM
CAS Latency
CL11
Rank
No
Voltage
1.5V
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top